Catscram Users Manual
CatScram cat repellent emits a series of pulsating ultrasonic sound waves for four seconds each time movement is detected and the LED flashes four times simultaneously. The CatScram uses a passive infrared motion sensor to detect when the cat nears the 90 degree protected area. The result-your cat becomes irritated by the sound, and moves out of the protected area. . . and off your furniture, kitchen counter tops, or whatever!CatScram Operation:
CatScram cat repellent uses a 9-volt, alkaline battery (not included) or a 9-volt, AC/DC adapter which can be purchased inexpensively in our online store. Adapter must be center positive (+). If the unit is to be used in one place, using the adapter (rather than buying batteries) can be very economical.
Hearing Impaired Cats:
White cats, by nature are hard of hearing and may not respond to this device. Some older, exotic breads, and Maine Coons may also not respond. Note: See return Information (below) for additional information.
CatScram Features:
- Passive infrared motion detector with an ultrasonic speaker - inaudible to humans
- Protects property: Keeps cats off countertops, table tops, furniture, and drapes and out of specific areas or rooms
- Protects pets: Keeps cats off balconies and away from poisonous plants, hot stovetops and dangerous machinery
- Allows use of a pet door for your dog while keeping your cat inside
- Portable: CatScram cat repellent can use a 9-volt alkaline battery or a 9-volt AC adapter for operation
- Uses minimal power and indicates when the battery is low
- Shows when motion is detected via blinking LED
- CatScram cat repellent guards a 6-foot range on the floor or flat surfaces and up to a 15-foot range or more when elevated or tilted.
Power Usage
The CatScram uses very little power and has an LED to indicate when the 9-volt battery is low. However, The unit can consume batteries quickly if activated frequently. Frequent activation is most common in high traffic areas like kitchens and bedrooms. If you intend to place the CatScram in a high traffic area we recommend you purchase an AC Adapter is not to power the unit.
CatScram LED Indicators:
- Warm-Up Indicator: When switched on, the CatScram cat repellent warms up for 40 seconds. During this time, the LED flashes once per 1.4 seconds for the first 32 seconds and increases to 4 flashes per 1.4 seconds during the last 8 seconds.
- Triggering Indicator: After it is warmed up, the CatScram cat repellent goes to work. The unit emits a series of pulsating ultrasonic waves for 4 seconds each time movement is detected and the LED flashes 4 time simultaneously.
- Low Battery Indicator: During the 40-second, warm-up period, if "Low Battery" occurs, the battery voltage is 7 volts or less. The LED will continue 8 flashes and the unit will shut down. Replace the battery immediately.
CatScram Specifications:
- Standby Current Drain: 60 micro-amp typical
- Ultrasonic Output: 118 DB typical
- PIR Protection Coverage: 6 feet on floor or flat surfaces, up to 15 feet or more if elevated or tilted
- PowerHouse Products warrants the CatScram cat repellent to be free from defects in materials and workmanship for 90 days. If your CatScram cat repellent is found to be defective within that time, PowerHouse Products will repair or replace your CatScram.
- If you find the CatScram cat repellent to be ineffective on your pet, you may return it within 30 days for a full refund (less shipping charges). In order to qualify for a refund, we must receive the unit in re-saleable condition within 30 days.
roseann salera (verified owner) –
the best product ever……my cats no longer get on my tables…………..i have been dealing with 3 female cats. the 1st day i used this product was the last day they got on my table. thank you for making a product that actually does what it says it can do….
Maribel Vasquez (verified owner) –
I bought a month ago and seems to be working for the 5 cats wondering around my parking space!